Repairs to uPVC Windows
uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they are not susceptible to get rusty or decay.
Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and also improve energy efficiency.
1. Broken Glass
The damaged glass in your windows could cause severe damage to your home, and could even be fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good shape.
For single pane windows, it is fairly easy to replace them, and the replacement will usually fit inside the frame that was previously installed easily. However If you have double pane windows that are anchored by internal beading, it'll be more difficult to take out the existing panes and install new ones. In this instance it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.
Wearing protective eyewear and thick gloves is essential if you plan to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric and not on the floor, where they could be trampled under.
Once the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from entering the home until a professional is able to come out and fix the window. This will also act as a barrier, preventing any intruders from gaining entry into your home. If the gap is large, you might think about an alarm door that comes with an integrated window, since it offers the best of both worlds.
2. Sagging
Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. In time, they could develop a number of problems, including sliding. A window that is sagging can cause problems with light, draughts and even security. It's crucial to act when you realize that your uPVC windows are sagging.
To fix a window that is sagging you can try to reposition the hinges. First, you'll need to open the windows so you can access the frame. With a screwdriver, you can remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the fit, tighten the screws to ensure that they stay in the right place.
If you are unable to reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause their tightness to decrease. It is essential to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.
uPVC handles could also loosen. The majority of the time this is due to screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. The first step is to close the window and then perform an initial test fit. The corners of the sash should align with the casing joint. If it isn't then you can use a screwdriver to loosen the handle, and then return the mechanism to its original position.
3. window repairs near me
If you wake up to wet floors and mouldy walls each time it rains it's important to take action. The leaks of water from windows do not only lead to the destruction of your home's structure but also hamper your efforts to regulate the temperature in your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or missing.
This is a simple fix that can be completed by any DIYer who has the ability. Depending on how serious the problem is, the old caulking may need to be removed. When it comes to uPVC repair, you should avoid over-caulking. This can make your window harder to clean and lower its energy efficiency.
Check that any drainage holes do not have debris inside them and ensure that the sill pan is angled correctly to drain away from the window. In more serious situations, you may have to replace the window.
Moldy sills and rotten ones are another sign of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the house.
If the leakage is occurring between the double-glazed window, it is more likely that the issue is more with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
Hinges could be the reason for the reason that your uPVC window is difficult to open or if it opens with an ease. They can be repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.
Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. Changing a window hinge is essentially a simple process but it can be easier to do if you have someone to assist in holding the frame in place.
It is also worth checking that the uPVC hinges are opened and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.
The issue can be caused due to opening the window in the wrong way or by a poor installation in the factory. This can often be resolved by sending us a photo on our website. We will be pleased to offer you advice.
It is also important to lubricate the hinges regularly. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. This must be done at a minimum once a year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.
5. Draughts
Draughts can be caused by several different causes. Firstly the hinges, again because of wear and tear, may become displaced, which causes a gap to form between the sash and the frame. They can be repaired by giving them thorough clean, however when they're beyond repair, it may be necessary to have them realigned or replaced. The second is the interlock, which is located on the hinge side of the window and can also become misaligned, again it's possible to give them a thorough clean, however in some cases it might be necessary to get them replaced.
The second most frequent reason for draughts are the window seals, these are prone to wear or damaged over time and allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures, and reduce the risk of draughts.
The final method to cut down on draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler that can be placed over your window sill. They will keep your home warm by blocking out cold air.
Your windows made of upvc will remain a great source of insulation and security in your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows eventually become worn out, and it could be more cost-effective to simply replace them rather than repair them. If you encounter any issues with your window made of upvc you should consult a professional as soon as possible.